Required web technologies and cookies make our website technically accessible to and usable for you. This applies to fundamental base functionalities such as navigation on the website, correct display in your internet browser or requesting your consent. Without these web technologies and cookies our website does not work.
Back
More about the intelligent systems
Intelligent Systems
Smart Monitoring and Diagnosing System (SMDS)
The SMDS allows you to monitor the real-time status of the ebus and the charging posts.
With the SMDS, customers can remotely diagnose any problems and control the bus systems, which significantly reduces the maintenance cost. Driving data generated by the SMDS can be analyzed and used for further research.
New intelligent low-voltage electricity management system
The new electric current control system has integrated all the electric circuits of the bus. The newly upgraded self-diagnosis function can effectively diagnose short circuits caused by excessive internal heat or voltage. The system can be tailor-made to meet the customers’ diverse operation requirements. The system provides additional protection for both the hardware and software and enhances the safety of the bus.
Autohold System
Autohold System ensures safety. When the driver brakes and the bus comes to a stop, the bus will automatically be prevented from moving even on a slope without stepping on the brake pedal.
Battery and Battery Management
The Iron-Phosphate batteries fitted to BYD ebuses have high energy and power density and at the same time meet high safety standards. The batteries have adopted BYD’s industry-leading Battery Thermal Management System (BTMS) which has a good heat interchange effect. This can effectively reduce the battery degradation and help extend battery life.
Keyless System
With Keyless System, the bus can be started and stopped by just one press on the ‘POWER’ button.
Regenerative Braking System
Regenerative Braking System converts some of the kinetic energy into electricity and stores it in the battery to give additional driving range.
Pre-heating System
The heating and air conditioning function can be switched on at a pre-set time thanks to the Pre-heating System.
100% Electric
BYD ebus is 100% Electric when choosing the optional fully electrical climate control system.
ADAS
Our ebuses are equipped with various ADAS functions that enhance safety and convenience including Tire pressure monitoring, Digital exterior rear mirror system, Alcohol interlock, Pedestrian & Cyclist Collision Warning (PCW), Forward Collision Warning (FCW), Headway Monitoring Warning (HMW), Lane Departure Warning (LDW), Speed Limit Indicator (SLI), Acoustic Vehicle Alerting System (AVAS), Blind Spot Information System (BLIS), Emergency Stop Signal (ESS), Reversing Detection System (REV), Driver Drowsiness and Attention Warning (DDR-AW).
Back
More about the safety
Safety first.
BYD own Test Centre is equipped with more than 100 professional labs and more than 3,000 test categories, for the whole vehicle, its system and components, drive system, vehicle material, safety, EMC and NVH to ensure the safety and reliability of the ebus.
The test centre meets the needs of multinational certification in America, Europe, Asia Pacific and other regions
Safety, NVH and EMC Test
BYD’s EMC and NVH laboratories are state of the art and meet national and international standards. Tested in these BYD labs, the BYD ebus has proven it does no electromagnetic harm and delivers an outstanding performance in noise, vibration and harshness. It’s safe, quiet and comfortable.
Wading Test
The degree of water ingress Protection of BYD ebus electrical components comply with IP67 norm, which means BYD ebuses pass the flooding test with 300mm water depth. Thus, The strong wading ability guarantees that the BYD ebus can operate well in heavy weather like rain storms or flooding.
Temperature Test
The BYD ebus does not only perform perfectly in extremely high temperature areas like Turpan in China, but also meets the expectations in very low temperatures like in the Nordics.
Road Tests
In line with the European road test standards, BYD ebus has successfully gone through a series of road tests with various loads (empty load, half load and full load) and road conditions (mountain,cobblestone ,sinusoidal, pitholes etc).
Back
More about the service
We're your partner for the long term.
Extensive service network
We have established an extensive Service Network in Europe, with local workshop in the Netherlands, UK, Belgium, Spain, Portugal and more. Due to our thorough training procedures we enable our service partners to provide you with high-level service and in-depth knowledge of your vehicles.
This way we can ensure you of BYD quality service wherever you might need it.
Spare parts readily available
Our European Spare Parts Distribution Center (300 m2 storage space) is located in the Netherlands, which provides sufficient stock for your spare part needs in the whole of Europe.
Our strong partnerships with third party logistics ensures your spare parts are delivered as quickly as possible regardless of the location, as well as delivery reliability, process transparent and flexible logistic solutions.
Our experienced team will work as your reliable partner, with fast response and swift service for your spare parts demands.
Helping your operation make the transition
Transitioning from traditional diesel vehicles to clean electric buses requires some adjustments. In order to achieve our mission to work towards a cleaner world, we want to help you make this much needed shift in any way we can.
Our in-house experts have the experience and knowledge to make the conversion go as smoothly as possible.
Full technical training to get your staff familiar
Electric vehicles comes with new technologies and we want to help you understand all aspects of your vehicles. We have an experienced training team to accommodate your training and develop the requested courses.
Professional technical training will be designed en provided to drivers and technical staff.
The driver will get all operational information in order to be well equipped to handle any situation. The training for the technical staff will learn about the bus as a whole, as well as its main components. This will allow them to be fully competent for all maintenance and repair work.
Safety first
We value safe labor conditions, so it is required that all technical staff working on BYD electric buses receives permission to work with high-voltage.
To ensure safety, the BYD Safety Operation Guide lists all the personal protective equipment and tools needed and provides further safety guidance for the operation. We will also provide training to introduce your staff how to deal with potential and existing high-voltage conditions in practice and how to safely use the protective equipment.
Extended warranties
At your request the warranty period can be extended.
Back
More about the battery
Advanced battery.
The heart of the BYD ebus: the battery. The power of BYD began with the development of small rechargeable batteries. Through years of research and development, we developed batteries to become efficient and more powerful. Simultaneously we worked towards creating the safest batteries in the business.
With our expertise in the three core technologies; batteries, electric motors and motor controllers, we know how to power buses and we know how to keep them going.
High performance.
With BYD’s proven technology, we strive to support your daily operations on a single charge, making opportunity charging no longer a necessity.
Battery Management System.
All BYD batteries are equipped with the Battery Management System offering various benefits:
Safety Management
Real-time monitoring of voltage, temperature, current and insulation performance to prevent battery over-charge and also protect against over-discharge.
Big Data Application
The battery management system realizes data transmission through the vehicle terminal. This supports real-time monitoring and active predictive analysis of battery operating data.
Battery Equalization
Smart battery equalization technology constantly adjusts the battery pack capacity, which eliminates inconsistent battery cell self-discharge resulting in extended mileage and service life.
Capacity Management
Due to this technology the system can accurately estimate the SOC (state of charge) of the battery, which supports precise estimation of mileage and automatic correction of battery nominal capacity.
Safety
To ensure the power battery’ s stability and safety, the Iron-Phosphate battery integrated in BYD ebuses has been proven by numerous rigorous tests, including Flame, Nail Penetration, Crush, Drop, Oven, Short Circuit, etc.
Thermal management.
BYD in-house developed BTMS (Battery Thermal Management System) is a liquid thermal management system that guarantees the battery temperature stays at the optimum operational temperature. This increases the safety and reliability of the battery system that enhance life of the battery and enables the vehicle to operate in extreme weather conditions.
Eco-friendly.
Of course battery-powered buses are inherently better for the environment than fossil-fuel alternatives. But BYD goes the extra mile by ensuring that the batteries themselves are also eco-friendly. Our Iron-Phosphate battery contains no heavy metals or toxic electrolytes, with no pollution or CO2 emissions during production.
Long-term warranty
With the utmost confidence in the battery quality, BYD provides a long-term standard warranty on the batteries
Bus.
We are the first electric bus manufacturer worldwide with over 74,000 ebuses delivered and
thus the most experienced. We provide a wide variety of ebus products to meet different
operational needs of customers, from city routes with high frequency and passenger load to
long-distance inter-city comfort travel.
Our buses are the result of extensive innovation and experience in battery technology. We
have mastered the three core technologies of ebuses: batteries, electric motors and electric
motor controllers. Also with the BYD’s own developed Rear Axle and Motor, the whole
eco-system run with homogeneity.
BYD doesn’t simply produce products, we are trying to create a better future because we care about the planet and are committed to preserving it for future generations.
BYD doesn’t simply produce products, we are trying to create a better future because we care about the planet and are committed to preserving it for future generations.
State-of-the-art design.
Discover the classic aesthetic of our vehicles. Stylish features can be tailor-made to align perfectly with your preferences.
Our electric buses are the direct result of our innovative technology and
dedication to a clean environment. We are the earliest and thus most experienced electric bus
manufacturer worldwide. We have mastered the three core technology of e-buses; batteries, electric
motors and electric motor controllers.
Our model range.
Our innovative technology is integrated across the entire fleet. With the widest range of all-electric buses on the market, we can accommodate any operation or route. Discover how our models can support your fleet.
Advanced battery.
BYD is the first company in the world to fully industrialize the Iron-Phosphate battery. This high-performance battery is safe, stable, environmentally friendly and features a longer battery life.
Find out more about the batteryWith BYD’s proven technology, we strive to support your daily operations on a single charge, making opportunity charging no longer a necessity.
The battery has undergone rigorous testing to ensure its safety.
BYD's thermal management technology keeps the batteries cooler, safer, lighter and prolongs service life.
With the utmost confidence in the battery quality, BYD provides long-term warranty on the batteries.
The battery contains no heavy metals or toxic electrolytes, with no pollution or emissions during production.
Advanced battery.
BYD is the first company in the world to fully industrialize the Iron-Phosphate battery. This high-performance battery is safe, stable, environmentally friendly and features a longer battery life.
With BYD’s proven technology, we strive to support your daily operations on a single charge, making opportunity charging no longer a necessity.
The battery has undergone rigorous testing to ensure its safety.
BYD's thermal management technology keeps the batteries cooler, safer, lighter and prolongs service life.
With the utmost confidence in the battery quality, BYD provides long-term warranty on the batteries.
The battery contains no heavy metals or toxic electrolytes, with no pollution or emissions during production or recycling.
6-in-1 motor controller.
As a result of its cutting-edge technology, the revolutionary BYD 6-in-1 motor controller integrates six critical components into one single compact module for enhanced efficiency, reliability and ease of maintenance.
6 Main Electrical Components Integrated:
- 2 electric motor control units
- 1 steering control unit
- 1 air compressor controller
- 1 DC-DC converter
- 1 power distribution unit
Intelligent systems.
The quality and reliability of our products is enhanced further due to the intelligent systems supporting them.
Find out more
Pre-heating System
The heating and air conditioning function can be switched on at a pre-set time thanks to the Pre-heating System.
Intelligent Start Battery Management
The intelligent start battery management will always ensure the vehicle is ready. Once the start battery is detected to be in low power, the system will charge it automatically.
Smart Monitoring and Diagnosing System (SMDS)
The SMDS allows you to monitor the real-time status of the ebus and the charging posts.
Autohold System
Autohold System ensures safety. When the driver brakes and the bus comes to a stop, the bus will automatically be prevented from moving even on a slope without stepping on the brake pedal.
Regenerative Braking System
Regenerative Braking System converts some of the kinetic energy into electricity and stores it in the battery to give additional driving range.
Intelligent systems.
The quality and reliability of our products is enhanced further due to the intelligent systems supporting them.
1
2
3
4
5
1. Pre-heating System
Heating and air-conditioning functionality can be turned on pre-set times, increasing its efficiency.
2. Smart Monitoring and Diagnosing System
The innovative system allows realtime monitoring and remote diagnostics of the ebus and its charging posts.
3. Autohold System
Autohold System ensures safety. When the driver brakes and the bus comes to a stop, the bus will automatically be prevented from moving even on a slope without stepping on the brake pedal.
4. Intelligent Start Battery Management
The intelligent start battery management will always ensure the vehicle is ready. Once the start battery is detected to be in low power, the system will charge it automatically.
5. Regenerative Braking System
The convenient braking system converts part of the kinetic energy into electricity and stores it in the battery for additional driving range.
Regulation
Our ebuses meet the latest European safety standards R155/R156, R29 (cab occupant protection), R93 (front lower protection) and R66 (vehicle rollover protection) tests to ensure the safety of the driver and passengers in the event of a collision and body deformation from the entire vehicle structure. The modular design of the protection structures allows customization for customers’ needs.
Multiple charging solutions.
BYD offers various charging solutions to meet all possible charging possibility. The DC fast charging solution is available with high charging power. The charging interface uses IEC 62193-3 standard Combo-2. And the charging communication protocol complies with the IS0 15118 standard.
Also, a pantograph charging is available, both in panto up and panto down versions All the charging equipment BYD provides is easy to install, use and maintain.
All testing ensures the safety
BYD has developed its own test facility for its vehicles. The BYD Test Centre is equipped with more than 70 professional labs and more than 3,000 test categories, for the whole vehicle, system and components, drive system, vehicle material, safety, EMC, NVH to ensure the safety and reliability of the ebus. The test centre meets the needs of multinational certification in America, Europe, Asia Pacific and other regions.
Find out more
Tailor-made ebuses.
No bus service or route is the same, so flexibility is paramount. Our products can be adjusted to meet all of your fleet requirements, from passenger capacity, frequency and route distance.
- Seating arrangements to best accommodate your passengers
- The most efficient battery system adapted to your operational needs
- Compatible with various convenient charging solutions
- Interior and exterior design perfectly aligned with your required style
- Additional features for optimal passenger and driver comfort
Full service to get your operation up and running.
We offer several service options to get your team and organization ready for your new vehicles. From technical training for your staff to easy access to spare parts and an extended service network. We got you covered.
Learn more about our services
